Skiedikliai & Lakai & Valikliai

Reduktorius, skystesnis visiems „Createx“ dažams ir valymui

Createx 4020 Automotive Reducer is a specialty thinner for use when painting in humid or cold conditions. Mix direct with Wicked Colors or mix with 4012 High Performance Reducer for create a balanced mix of solvents in the reducer so colors flow & dry fast yet do not seed in the cup. Recommended starting mix is 4012 3:1 4020 Automotive Reducer (25% 4020 per volume). Contains Acetone and Glycol Ethers. Use only in controlled spray environments with adequate ventilation and a NIOSH / MSHA approved respirator.

Creates an acrylic-urethane paint.

A water-based, acrylic-urethane clear for use as a protective inter-coat applied over candy2o to prevent dyes from leaching ("bleeding") into top-coated colors and clear.

Createx 4051 Satin Ultra-Violet Light Stabilizer Clear UVLS clears are water-based, architectural-grade clears made for interior and exterior applications. UVLS Clears are made with an acrylic – aliphatic polyurethane resin which is exceptionally durable with excellent adhesion. Clears are durable and do not yellow over time. UVLS stands for Ultra-Violet Light Stabilizer; clears contain UV protection for underlying colors, especially helpful when top-coating candy2o and other dyes & stains. Architectural-grade clear for interior & exterior application Compatible with all Createx paints. UVLS = Ultra-Violet Light Stabilizer. Clears protect underlying pigments and dyes. Use as adhesive primer direct to metal, plastic and other difficult to paint substrates. Thin 5% - 10% per volume with 4011 Reducer 4051 Satin & 4052 Matte maintain a consistent gloss-level that doesn’t “gloss up” when excess material is applied. Perfect for any application: Spray gun, Airbrush, Brush, Roller Available in 2oz., 4oz., 8oz., 16oz., 32oz. & 1-Gallon sizes.

Lakas lkrilo alifatinis poliuretanas skaidrus vandens pagrindu

5601 Createx Transparent Base – Colorless resin base of Createx Airbrush Colors. Use as a thinner by mixing with Airbrush Colors to increase transparency and help improve, may be mixed in any ratio. Use as a light protective coating which may be applied over colors. For washfast textile painting, heat-cure Transparent Base after application over colors. Use for preparation onto fabric prior to painting to prevent fabric knap from interfering while airbrushing. Heat-cure Transparent Base prior to applying colors.

Opaque Base: Add to Createx transparent (matte) airbrush colors for added opacity. Extends opaque colors to a lighter value. See label for usage information.

5603 Matte Top Coat – Water-based, matte clear. Use as a protective coating which creates a matte finish. Best used for application on fabric, leather and interior application.

5604 Gloss Top Coat – Water-based, gloss clear. Use as a protective coating which creates a gloss finish. Best used for application on fabric, leather and interior application.

5620 Createx Gloss Clear - A water-based, acrylic clear for application over any Createx Colors paint. Durable, for both indoor and outdoor use. Not automotive-grade. Appears milky in solution and dries to a glossy, transparent coating. Reduce 5 – 10% 4012 High Performance Reducer. Apply with either airbrush or spray-gun.

5621 Createx Satin Clear coat - A water-based, acrylic clear for application over any Createx Colors paint. Durable, for both indoor and outdoor use. Not automotive-grade. Appears milky in solution and dries to a glossy, transparent coating. Reduce 5 – 10% 4012 High Performance Reducer. Apply with either airbrush or spray-gun.